Product Specifications:
The 095000-9550 (OE Cross-Ref: S00000218+01 / S0000021801) upgraded aftermarket fuel injector is precision-machined to permanently eliminate rough engine idling and severe heavy-load power loss across your commercial truck and machinery fleet. Forged from industrial-grade thermal-resistant alloys, this internal valve assembly resists high-pressure cavitation and extreme combustion chamber heat for maximum operational uptime. Every single unit is strictly Tested on a DCI Bench to verify micro-second solenoid response and optimal common rail fuel atomization. Equipped with a pre-calibrated auto-adaptive control valve, it guarantees a seamless Plug & Play installation where no dealer coding is required, restoring your SDEC heavy-duty diesel engine to peak operating efficiency.
📊 Part Number Cross Reference
(Data verified via global catalog search – Extensive Interchangeability)
| Manufacturer Ref (Standard) | Original Equipment (SDEC) |
|---|---|
| 095000-9550 / 095000-955# | S00000218+01 / S00000218 01 |
| 0950009550 / 9709500-955 | S0000021801 / S00000218 |
🚛 Fits Applications (Engine & Vehicle)
(Verified application list)
| Make | Model / Application | Engine Size | Year | Engine Code & Specs |
|---|---|---|---|---|
| SDEC Diesel | Commercial Truck & Bus Fleet | Heavy-Duty | Heavy-Duty | High-Pressure Common Rail System |
| Construction & Industrial Machinery | Turbocharged Direct Injection Diesel |
👨🔧 Tech Notes & Installation Guide (FAQ)
Q: Why do heavy-duty diesel mechanics insist on replacing the full set of injectors simultaneously on SDEC common rail engines?
A: Installing a single brand-new injector alongside fatigued units creates severe pressure fluctuations across the high-pressure common rail. Under continuous hauling or industrial workloads, this uneven fuel delivery triggers destructive cylinder knocking and excessive exhaust temperatures that can crack pistons. We strongly advise using our tiered wholesale discount to replace the complete injector set together for balanced combustion.
Q: Does the 095000-9550 (S00000218+01) electronic injector require manual dealer coding during installation?
A: No external dealer programming is required. Every assembly is dynamically calibrated on an advanced DCI test bench to match standard factory flow tolerances, allowing your engine ECU to self-adjust for a direct plug-and-play installation.
Q: Expert Mechanic Tip: What mandatory preparation step prevents immediate control valve seizure during initial startup?
A: Microscopic metallic contamination or water in the fuel supply will lock up a high-pressure nozzle within minutes of engine ignition. Before mounting the new units, you must thoroughly flush the fuel rail and high-pressure lines and install a brand-new primary fuel filter and water separator to protect your engine.
🔍 Explore More Heavy Duty Parts:
- Looking for more options? Browse our complete selection of Fuel Injectors & Pumps.
- Keep your fleet running smoothly with our premium Engine Components.
⚖️ Legal Disclaimer
Part numbers, OE numbers, and brand names mentioned above are for reference and identification purposes only. This product is a compatible aftermarket replacement part and is NOT manufactured, sponsored, or affiliated with the original equipment manufacturers.
